Posted   by 

Fortigate Rules Plex Media Server

Server

Overview

For SSL VPN, all FortiGate or EMS must use the same TCP port. Creating priority-based SSL VPN connections SSL VPN supports priority-based configurations for redundancy. My Dell C1100 server (Plex media server) is connected on the LAN interface and all of my Rokus and other streaming devices are segregated onto the IoT VLAN. I have a firewall rule stating that anything on the 192.168.2.xxx (IoT VLAN) network CAN NOT talk to any devices on the 192.168.1.xxx (LAN) network but anything from LAN CAN talk to the IoT.

Configure the FortiGate to access the RADIUS server. Configure the SSID with WPA2-Enterprise authentication. In the Authentication field, select RADIUS Server and choose the RADIUS server that you will use. Create VLAN subinterfaces on the SSID interface, one for each VLAN. The FortiGate firewall has a built-in iPerf3 client and a limited embedded iPerf3 server which can be used in order to measure bandwidth. To perform bandwidth test from the FortiGate firewall towards an iPerf3 server, use # diag traffictest command. There is multiple.

This article explains how to configure Nat Port Forwarding for Web Server on the Fortigate firewall device, so that external users can access the Web Server inside the local network

How to configure

  • Log in to Fortigate by Admin account
  • Firewall Object -> Choose Virtual IPs -> Click Create New
  • Name for Nat rule
  • In External Interface: Choose Port WAN of device
  • In External IP Address/Range: Enter IP WAN of device
  • In Mapped IP Address/Range: Enter IP of Web Server
  • Tick in Port Forwarding
  • In Protocol: Choose TCP
  • In External Service Port: Enter 80 for HTTP and 443 for HTTPS
  • In Map to Port: Enter for HTTP and 443 for HTTPS

-> Click OK to save

  • Policy -> Click Create New
  • In Incoming Interface: Choose Port WAN of device
  • In Source Address: Choose All
  • In Outgoing Interface: Choose Port LAN of device
  • In Destination Address: Choose Web Server was created before
  • In Service: Choose HTTP
  • Tick in Enable NAT

-> Click OK to save

Fortigate Rules Plex Media Server Download

** If you have difficulty configure Sophos products in Viet Nam, please contact us:

Fortigate Rules Plex Media Server Free

Hotline: 02862711677

Email: info@thegioifirewall.com

Fortigate Rules Plex Media Servers

Hi,
today I had and solved some problems when installing Plex via Plugin-GUI in FreeNAS 11.2-RELEASE . I am writing this to help others with similar issues.
Yes I know there are other ways to keep Plex uptodate but when I updated to 11.2 Plex-Plugin was uptodate and I thought I would give the Plugin a try.
I was waiting for an update of PlexMediaServer plugin. Today I saw it in Plugins/Available update raised to version 1.15.2.793_1 (was still 1.14.x). When I looked at Plugins/Installed I found no option to update the plugin and under version was displayed N/A. I resolved the missing version by renaming my plugin from plex to plexmediaserver via SSH.
iocage rename plex plexmediaserver
That renamed /mnt/VOL/iocage/jails/plex to /mnt/VOL/iocage/jails/plexmediaserver but there was a plex.json left as is. So I renamed it it also changed its content to refer to plexmediaserver instead of plex. I am unsure what this file is used for. So feel free to enlighten me.
cd /mnt/VOL/iocage/jails/plexmediaserver
mv plex.json plexmediaserver.json
vi plexmediaserver.json
After that the correct version info was displayed :) but still no possibility to update from GUI, so I again used SSH.
iocage update plexmediaserver
iocage start plexmediaserver
Now Plex was raised to version 1.15.2.793 :) but the plugin already again seems to be outdated and shows an available update for version 1.15.3.876 .
After logging in to Plex I had a new issue. With all options under Settings/Settings I got the message 'Server settings are unavailable.' (in german 'Servereinstellungen sind nicht verfügbar.'
The cause was a wrong entry in /mnt/VolZ1/iocage/jails/plexmediaserver/root/usr/local/etc/rc.d/plexmediaserver.
After changing
export LD_LIBRARY_PATH='${SCRIPTPATH}'
to
export LD_LIBRARY_PATH='${SCRIPTPATH}/lib'
all was Ok.
Bye Frank